Product Overview
Cost Effective Inverter/Chargers from Magnum Energy
The MM Series Inverter/Charger is a modified sine wave inverter providing a cost effective solution for those with smaller power needs in mobile applications. Versatile, easy-to-use, and lightweight, the MM Series provides a reliable base for your energy system.
Safe and reliable: The MM Series is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01 for mobile use.
Attractive styling: The modern, hourglass case, paired with the die cast aluminum base combines form with function, creating an attractive unit that uses its base as a heat sink for superior high temperature operation.
Features:
Standard transfer relay: The standard 20 amp transfer relay will pass AC power through the inverter when using grid or generator power.
Versatile mounting: Mount the MM Series on a shelf, wall, or even upside down.
Fan cooled: The MM Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.
Low battery protection: If your battery voltage goes below the cut-out setting the MM Series will automatically shut down, saving your batteries.
High battery protection: If your battery voltage reaches over the cut-out setting the MM Series will shut down.
Current overload protection: The MM Series will automatically shut down if its output wattage is exceeded or it detects a short in the wiring, saving the unit from costly damage.
Convenient switches: The MM Series comes with an on/off front-mounted switch with an easy-to-read LED indicator.
Circuit breaker protection: Every model comes with built in input and output circuit breakers for ease of installation.
Battery temp sensor: The standard battery temp sensor monitors temperatures from 0 - 50° C.
Buy with ease: The MM Series is backed by a two-year (24-month) parts and labor warranty.
Specifications
Inverter Specifications
Input battery voltage range 9 to 15.5 VDC
Nominal AC output voltage 120 VAC 5%
Output frequency and accuracy 60 Hz 0.1%
1 msec surge current (amps AC) 42
100 msec surge current (amps AC) 23
5 sec surge power (real watts) 2100
10 sec surge power (real watts) 1900
30 sec surge power (real watts) 1750
5 min surge power (real watts) 1450
30 min surge power (real watts) 1375
Continuous power output at 25° C (with 1.0 PF) 1200 VA
Continuous current output 10 AAC
Maximum continuous input current 160 ADC
Inverter efficiency 95%
Transfer time 16 msecs
No Load (120 VAC output) 1.3 ADC
Waveform Modified Sine Wave
Charger Specifications
Continuous output at 25° C 70 ADC
Charger efficiency 88%
Power factor > 0.95
Input current at rated output (AC amps) 9
General Features and Capabilities
Transfer relay capability 12 AAC
Battery temperature compensation Yes
Remote available (optional) Yes, MM-R or ME-RC
Internal cooling 0 to 59 cfm variable speed
Overcurrent protection Yes, with two overlapping circuits
Overtemperature protection Yes on transformer and MOSFETS
On/Off with status indicator Yes, front mounted and easily accessible
Low battery cutout 10 VDC, adjustable on most models with the ME-RC remote
AC output and input Hardwire
Output circuit breaker 15 A switchable
Input circuit breaker 16 AAC
Listings ETL Listed to UL/cUL458, CSA C22.2 #107.1-01
Warranty Two years
Environmental Specifications
Operating temperature -20° C to +60° C (-4° F to 140° F)
Nonoperating temperature -40° C to +70° C (-40° F to 158° F)
Operating humidity 0 to 95% RH non condensing
Physical Specifications
Dimensions (l x w x h) 16.6" x 8.4" x 4.7" (42 cm x 21 cm x 12 cm)
Mounting Shelf (top or bottom up) or bulkhead (vents up)
Weight 20 lb (9kg)
Max operating altitude 15,000' (4570 m)
Construction ABS plastic top and cast aluminum bottom
