Magnum ME2012 2000W Inverter 12v W/100A Charger 2 20A Brkrs (ME2012-20B-U)

(No reviews yet) Write a Review
MSRP: $1,571.00
$1,031.99
(You save $539.01 )
SKU:
wzm44510
UPC:
892608001066
Condition:
New
Weight:
43.00 LBS
Shipping:
Free Shipping

Product Overview

Reliable Mobile Power from Magnum Energy

The ME Series Inverter/Charger from Magnum Energy is a new generation inverter designed specifically for rugged mobile applications. The ME Series is powerful, easy-to-use, and best of all, cost effective.
Safe and reliable: The ME Series is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01, ensuring that the inverter is safe and reliable.

Easy-to-install: Install the ME Series in four easy steps: simply connect the inverter's output to your distribution circuits or electrical panel, connect your shore power cable (AC) to the inverter's
easy-to-reach terminal block, connect the batteries, and switch on the power.

Features

The ME Series Inverter/Charger is loaded with features:

Power Factor Corrected (PFC) Charger: The charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger - using only 15 amps per 100 amps versus 23 amps used by standard chargers.

Choices: The ME Series comes in three power models, allowing you to choose the model that is right for you.

Versatile mounting: Mount the ME Series on a shelf, bulkhead, or even upside down.

Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.

Multiple ports: The ME Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.

Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.

Convenient switches: The ME Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.

Expanded transfer relay: 60 Amp transfer service is available on all models.

Buy with ease: The ME Series is backed by a three-year (36-month) limited warranty.

Accessories and Options*

Remote control: For convenient finger-tip operation, including the new one-knob? programming.

AGS module: Automatically starts and stops your generator based on temperature or battery voltage.

Inverter Specification ME2012 ME2512 ME3112
Input battery voltage range 9 - 16 VDC 9 - 16 VDC 9 - 16 VDC
Nominal AC output voltage 120 VAC 120 VAC 120 VAC
Output frequency and accuracy 60 hz   0.1Hz 60 hz   0.1Hz 60 hz   0.1Hz
1 msec surge current (amps AC) 60 100 120
100 msec surge current (amps AC) 37 45 50
5 sec surge power (real watts) 3700 5000 6000
30 sec surge power (real watts) 3450 4500 4800
5 minute surge power (real watts) 3100 3500 3950
30 minute surge power (real watts) 2400 2900 3500
Continuous power at 45° C 2000 VA 2500 VA 3100 VA
Maximum continuous input current 266 ADC 333 ADC 413 ADC
Inverter efficiency (peak) 95% 91% 90%
Transfer time 16 msecs 16 msecs 16 msecs
Search mode ( Typical) 5 watts 5 watts 5 watts
No load ( 120 VAC output ) Typical 20 watts 23 watts 25 watts
Wave Form Modified Sine Wave
Charger Specifications
Continuous output at 45° C 100 ADC 120 ADC 160 ADC
Charger efficiency 85% 85% 85%
Power factor > .95 > .95 > .95
Input current at rated output (AC amps) 15 18 21
General Features and Capabilities
Transfer relay capability 2 legs at 30 A for 120 V/30 A or 240 V/60 A service
Five stage charging capability Bulk, Absorb, Float, Equalize, and Battery Saver™
Battery temperature Compensation Yes, 15 foot battery temp sensor standard
Internal cooling 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans
Overcorrect protection Yes, with two overlapping circuits
Conformal coating on PCB's for corrosion protection Yes
Over temperature protection Yes, On Transformer, MOSFETS, and battery
Stainless steel fasteners for corrosion protection Yes
Dual AC branch rated output breakers On the ME2012-20B only - AC breakers in 20 amp ratings
Listings ETL Listed to UL/cUL 458, CSA C22.2 #107.1-01
Warranty 3 Years
Environmental Specifications
Operating temperature -20° C to +60° C (-4° F to 140° F)
Nonoperating temperature -40° C to +70° C (-40° F to 158° F)
Operating humidity 0 to 95% RH non condensing
Physical Specifications
Dimensions (h x w x d) 13.75" x 12.65" x 8.0" (34.9 cm x 32.1 cm x 20.3 cm)
Mounting Shelf (top or bottom up) or bulkhead (vents up)
Max operating altitude 15,000 feet
Weight 37 lb 41 lb 46 lb

Reviews

(No reviews yet) Write a Review